The LED is suitable for light DIY on mutirotor, airplane, helicopter, RC car etc.
This LED adopts 3 pieces of RGB 5050 lamp beads, with DIP switch on board. According to toggle different switch combination, the LED can switch among 7 colors.
Working Voltage: 10-13V DC
1. The parcel comes with a 30cm black and red power wire. User can cut it to the proper length according to real use.
2. Pay attention to the ¡°+¡± and ¡°-¡± and insulation
3. Toggle the switch on to different channel to choose 7 color
4. We suggest use double side tape to paste the LED lights on frame
5. The output voltage of the 12V version is between 10-13V, either 3S lipo battery or 12V BEC can power it.
When the output is 12V, the power and current of the LED:
B ON = Blue 0.35W, 0.03A
R ON = Red 0.35W, 0.03A
G ON = Green 0.35W, 0.03A
B + R ON = Purple 0.70W, 0.06A
B + G ON = Cyan 0.70W, 0.06A
R + G ON = Yellow 0.70W, 0.06A
B + R+G ON = White 1.05W, 0.09A