ARRIS X220 220MM FPV Racing Drone Super Combo

ARRIS X220 220MM FPV Racing Drone Super Combo

Item# CA0125
USD $155.00
QTY:
无标题文档

Please Note:
1. This is an unassembled quadcopter super combo, you have to assemble all the components by yourself. If you want assembled RTF version, please click Here.
If you have your radio, receiver and battery,and do not want to assemble the drone,you can choose the BNF version here.

Specifications:
Diagonal Wheelbase: 220mm
Flight Controller: F3 flight Controller
Frame Material: Pure Carbon Fiber
Frame weight:
BNF weight:329.5g
Motor: ARRIS X2205 V2 2300KV brushless motor
Camera: ARRIS XAT700M FPV camera
FPV TX: 5.8G 200mw 40CH
Antenna: 5.8G Antenna
Flying Time: about 10 minutes (4S 1500mah battery)

ARRIS X220 is one "X" symmetrical design,with the 220mm wheelbase fpv racing drone, it is compatible with 5" propellers.The ARRIS X220 comes with the chamfered edge design on the arm, which gives the quad a sleed look.The ARRIS X220 comes with 4mm pure carbon fiber plate arm, make the frame super strong.The ARRIS X220 is made of pure carbon fiber with alloy pats, the weight is quite light.The structure of the X220 is quite simple, but it has high power compacity.The battery can installed on top of the quad or below.With optinal seat, you can mount the Gopro or other sports camera on top of the frame.

Flycolor Raptor S-Tower comes with BLHei-S 4-in-1 ESC and F3,PDB and OSD. The ESC comes with EFM8BB21F16G MCU, support Dshot / Multishot / Oneshot,support high KV motor, can support at most 500k eRPM.Dshot is digital signal, anti-interference ability is stronger, and do not need throttle calibration.
The default firmware of the F3 is betaflight,it supports PPM, PWM and SBUS remote control / receiving mode. Built-in current meter, OSD directly display the real-time current without any additional connection.
With the tower on the ARRIS X220, the wires are tidy and concise. And it is more convenient to maintain in the future.

ARRIS X2205 V2 2300KV brsushless motor is high end brushless motor specially designed for high performance fpv racing drones.It adopts brand new M5 steel shaft, improving the structure strength. It had been upgraded to centrifugal fan design, optimizing the heat dissipation.It also adopts original Japan NSK bearing and N52 tile-shape magnets to ensure the power and quality of the motor.

ARRIS 5042 propeller--It has bigger windward area, well balance and strengthen root, and the efficiency is 10% higher than normal propeller.

ARRIS XAT700M HS1177 fpv mini camera is specially designed for FPV. It perfoms well in both bright and dark condition with 700TVL high quality image.The angle of the camera is adjustable on the ARRIS X220.

Specifications:
Image Sensor: 1/3" High Sensitivity CMOS sensor 
Resolution: 700TVL 
TV System: PAL/NTSC(based on country) 
White Balance: AUTO 
WDR: super WDR 
Mirror: AUTO 
Min. Illumination: 0.1lux 
D/N: AUTO 
AGC: AUTO 
Sync Mode: INTERNAL 
Video Output: 1.0Vp-p, 75ohm 
DNR: 2D-DNR 
Power: DC5~DC17V 
Current: about 55mA 
Operating Temperature: -10℃-50℃
Storage Humidity: 20~95% 
Dimension: 26 x 26mm

Package Include:
1 x ARRIS X220 FPV Racing Quad Frame
4 x ARRIS X2205 2300KV V2 Brushless Motors (2CW+2CCW)
1 x Flycolor Raptor S-Tower BHeli-S 2-4S 4-in-1 30A ESC + F3 + PDB + OSD
4 x ARRIS 5042 3-blade Propeller
1 x ARRIS XAT700M FPV mini camera
1 x 5.8G 200mw 32CH FPV TX
1 x FPV Transmitter Antenna
2 x Battery straps